TESTEC High-Voltage Probe

Brand: TESTEC
Origin: Germany

TESTEC high-voltage probe.

Key specification options

Type: Oscilloscope probe / Multimeter probe
Attenuation: x100 / x1000 / x1000 @10 MΩ x2000 @1 MΩ
Bandwidth: 300 MHz / 40 MH (-3 dB) / DC~220 MHz and more
Rise time (typical): ≤1.2ns / ≤ 1.2ns / ≤ 9ns and more
Input impedance: 100 MΩ, 5 pF / 100 MΩ, 3 pF / 900 MΩ, 2 pF and more
Input voltage: 2000V (DC + Peak AC) / DC 8 kV, AC 6 kVrms, PEAK 16 kV / DC 10 kV, AC 7 kVrms, PEAK 20 kV and more

Measurement and application

High voltage measurement requires the probe, cable and receiving instrument to be considered together. The waveform, test medium, measurement location and grounding arrangement all influence the setup.

Selection and connections

Specify whether the task concerns DC, AC or pulses, and describe the test environment and instrument input. Follow the selected model instructions for installation, grounding and operation. Suitability under one set of conditions does not establish suitability under another.

Models & specifications

TESTEC High-Voltage Probe

High-voltage probe model table

TESTEC High-Voltage Probe / High-voltage probe model table
Model	Type	Attenuation	Bandwidth	Rise time (typical)	Input impedance	Input voltage	Accuracy
TT-HV 200	Oscilloscope probe	x100	300 MHz	≤1.2ns	100 MΩ, 5 pF	2000V (DC + Peak AC)	DC-Accuracy : 2%
TT-HV 400	Oscilloscope probe	x100	300 MHz	≤ 1.2ns	100 MΩ, 5 pF	2000V (DC + Peak AC)	DC-Accuracy: 2%
TT-HVP 08	Oscilloscope probe	x1000	40 MH (-3 dB)	≤ 9ns	100 MΩ, 3 pF	DC 8 kV, AC 6 kVrms, PEAK 16 kV	VDC: ±2%[+5 kV]; ±3%[+5 kV-8 kV] VAC: ±3% @ 1 kHz
TT-HVP 15 B	Oscilloscope probe	x1000	40 MH (-3 dB)	≤ 9ns	100 MΩ, 3 pF	DC 10 kV, AC 7 kVrms, PEAK 20 kV	VDC: ±6%
TT-HVP 2739	Oscilloscope probe	x1000	DC~220 MHz	≤ 1.6ns	900 MΩ, 2 pF	DC+AC peak 39 kV, AC 27 kVrms	VDC: ±3% VAC: ±6% @ 1 kHz
TT-HVP 40	Multimeter probe	x1000 @10 MΩ x2000 @1 MΩ	300 Hz (-3 dB)	—	1000 MΩ	DC 40 kV, AC 28 kVrms(0..300 Hz)	—

Downloads

PDF